LOOK at the photos!! AS far as I can tell it is in useable shape and ready to take home and use with a portion of the main drive belt pulley chipped out of it NO visible cracks NO visible repairs, came off of a running when last parked tractor, we took it to the local generator shop to have it tested, and they said it is GOOD Working and ready to use. Check out my other GREAT listings. Or you can pick it up at my place in Mt. Etna IN at no additional cost to you. Thanks again for looking!
303023486 New Water Pump w/ Pulley Fits Mpl Moline Tractor Model 1755. One New Aftermarket Replacement Water Pump with Pulley for Minneapolis Moline (Mpl Moline) / White / Oliver Tractor. This aftermarket replacement water pump with pulley is a direct-fit cooling system component for the White / Oliver / Minneapolis Moline 1755 tractor (Serial Number 220000 and above). The pump circulates coolant through the engine to maintain proper operating temperature and prevent overheating. This unit includes the long 2-groove water pump pulley — verify your serial number before ordering, as this pump with pulley applies to SN 220000 and later production only. White / Oliver / Minneapolis Moline: 1755 (SN 220000>). Replaces Part Number(s). 303023486, 303023486-R, 3023486P, CSU80-0024, SW02267. New aftermarket replacement part – not remanufactured, not used. About Reliable Aftermarket Parts. Reliable Aftermarket Parts is your trusted source for high-quality replacement parts covering a wide range of outdoor and heavy equipment. We specialize in parts for Lawn & Garden, Snow Removal, UTV, ATV, and Golf Cart machinery, as well as Backhoes, Crawlers, Excavators, Tractors, Skid Steers, and more – covering most leading brands and models in the industry. Our team is here to help you find the right part and get your equipment back up and running. Please note: This policy does not apply to glass or seat orders. Please save all original packaging. If you receive an item not as described. Have questions before you order? How do I know my order was placed successfully? Can I return a part that doesn’t fit or that I no longer need? John Deere, Allis Chalmers, Ford/New Holland, Case, Massey Ferguson & More. Allis Chalmers, International Harvester, Caterpillar, Komatsu & More. Bad Boy, Briggs & Stratton, Cub Cadet, Honda, Sears, Snapper & More. Ariens, Briggs & Stratton, Jacobsen, Toro, Troy-Bilt, Sears & More. Expertly trained staff ready to help you track down the right part every time.
Add to Favorite Sellers. 63 Amp Alternator w/ Pulley -Fits Minneapolis Moline Tractor. Quality Aftermarket 63 Amp Alternator w/ Pulley -Fits Minneapolis Moline Tractor Fits: Avery & MM models Specifications 6-1/4 housing dia. 5/8 belt width For 12-volt negative ground systems only. Simple 1-wire alternator hook up: Run a wire from alternator through ammeter to positive side of battery! Must rev engine to 800 – 850 RPM in order to self excite. We recommend verifying the proper fit for your application with a parts catalog or other reference documents. All aftermarket items have been hand selected by our team and are continuously monitored by a quality control department. Should a craftsmanship or fitment concern be identified, JJAgParts will be sure to work with our customers to stand behind our products. Be sure to check out our other listings for great aftermarket and NOS items! Don’t forget to leave us feedback and we will be sure to do the same! . Thank you for this opportunity to earn your business! Thank you for looking! We appreciate the opportunity to earn your business. Feel free to ask any questions you may have.
Add to Favorite Sellers. Quality Aftermarket: Mini 35 Amp Alternator w/ Pulley Fits:Minneapolis Moline Tractor R, 335, 445, JetStar, 4 Star, JetStar 2 JetStar 3, 5 Star, M604, M670, 2 Star, A, BF, Big Mo 400, Big Mo 500, Big Mo 600, GBD, GT, GTA, GTB, GTBD, RT, U, UB, UBD, UDLX, UT, V, ZA, ZAE, ZAN, ZAS, ZAU, ZB, ZBE, ZBN, ZBU, ZTI, ZTN, ZTS, ZTU Specifications 435 Amp 1 wire hook up Built in regulator Works with magneto or distributor ignitions 4-1/2″ housing diameter 2-3/4″ pulley outside diameter 1/2 belt width For negative ground systems only Simple 1 wire alternator hook up: Run a wire from the alternator through the ammeter to positive side of battery. Must rev the engine to 800 – 850 RPM in order to self-excite. If you need a 5/8 pulley please view JJAB2315 Replacement Numbers. We recommend verifying the proper fit for your application with a parts catalog or other reference documents. All aftermarket items have been hand selected by our team and are continuously monitored by a quality control department. Should a craftsmanship or fitment concern be identified, JJAgParts will be sure to work with our customers to stand behind our products. Be sure to check out our other listings for great aftermarket and NOS items! Don’t forget to leave us feedback and we will be sure to do the same! . Thank you for this opportunity to earn your business! Thank you for looking! We appreciate the opportunity to earn your business. Feel free to ask any questions you may have.
Add to Favorite Sellers. 63 Amp Alternator w/ Pulley -Fits Minneapolis Moline Tractor. Quality Aftermarket 63 Amp Alternator w/ Pulley -Fits Minneapolis Moline Tractor Fits: Avery & MM models Specifications 6-1/4 housing dia. 5/8 belt width For 12-volt negative ground systems only. Simple 1-wire alternator hook up: Run a wire from alternator through ammeter to positive side of battery! Must rev engine to 800 – 850 RPM in order to self excite. We recommend verifying the proper fit for your application with a parts catalog or other reference documents. All aftermarket items have been hand selected by our team and are continuously monitored by a quality control department. Should a craftsmanship or fitment concern be identified, JJAgParts will be sure to work with our customers to stand behind our products. Be sure to check out our other listings for great aftermarket and NOS items! Don’t forget to leave us feedback and we will be sure to do the same! . Thank you for this opportunity to earn your business! Thank you for looking! We appreciate the opportunity to earn your business. Feel free to ask any questions you may have.
Add to Favorite Sellers. 63 Amp Fast Start Alternator with Pulley fits Minneapolis Moline Tractor. Quality Aftermarket 63 Amp Fast Start Alternator w/ Pulley Fits Minneapolis Moline Avery & MM models Tractors Specifications 6-1/4 housing dia. 5/8 belt width For 12-volt negative ground systems only. Simple 1-wire alternator hook up: Run a wire from alternator through ammeter to positive side of battery! We recommend verifying the proper fit for your application with a parts catalog or other reference documents. All aftermarket items have been hand selected by our team and are continuously monitored by a quality control department. Should a craftsmanship or fitment concern be identified, JJAgParts will be sure to work with our customers to stand behind our products. Be sure to check out our other listings for great aftermarket and NOS items! Don’t forget to leave us feedback and we will be sure to do the same! . Thank you for this opportunity to earn your business! Thank you for looking! We appreciate the opportunity to earn your business. Feel free to ask any questions you may have.
Add to Favorite Sellers. 63 Amp Alternator w/ Pulley -Fits Minneapolis Moline Tractor. Quality Aftermarket 63 Amp Alternator w/ Pulley -Fits Minneapolis Moline Tractor Fits: Avery & MM models Specifications 6-1/4 housing dia. 5/8 belt width For 12-volt negative ground systems only. Simple 1-wire alternator hook up: Run a wire from alternator through ammeter to positive side of battery! Must rev engine to 800 – 850 RPM in order to self excite. We recommend verifying the proper fit for your application with a parts catalog or other reference documents. All aftermarket items have been hand selected by our team and are continuously monitored by a quality control department. Should a craftsmanship or fitment concern be identified, JJAgParts will be sure to work with our customers to stand behind our products. Be sure to check out our other listings for great aftermarket and NOS items! Don’t forget to leave us feedback and we will be sure to do the same! . Thank you for this opportunity to earn your business! Thank you for looking! We appreciate the opportunity to earn your business. Feel free to ask any questions you may have.
Add to Favorite Sellers. 63 Amp Fast Start Alternator w/ Pulley Fits Minneapolis Moline. Quality Aftermarket 63 Amp Fast Start Alternator w/ Pulley Fits Minneapolis Moline Avery & MM models Tractors Specifications 6-1/4 housing dia. 5/8 belt width For 12-volt negative ground systems only. Simple 1-wire alternator hook up: Run a wire from alternator through ammeter to positive side of battery! We recommend verifying the proper fit for your application with a parts catalog or other reference documents. All aftermarket items have been hand selected by our team and are continuously monitored by a quality control department. Should a craftsmanship or fitment concern be identified, JJAgParts will be sure to work with our customers to stand behind our products. Be sure to check out our other listings for great aftermarket and NOS items! Don’t forget to leave us feedback and we will be sure to do the same! . Thank you for this opportunity to earn your business! Thank you for looking! We appreciate the opportunity to earn your business. Feel free to ask any questions you may have.
One of a Used Minneapolis Moline Belt Pulley. 1.45 ID Shaft. Removed from a model: KTA. Please check your model and serial number against this part number to insure this part is right for your application. Please ask if you have any questions about the part and application of the part. We will be more than happy to look it up with your model and Serial Number and to help in any way we can. All of our used parts are inspected by our shop mechanics and personnel to insure that we sell good parts. Inspection notes: GOOD AND USABLE.
