Delco Ignition Tune up kit for Allis Chalmers B C CA G H3 IB RC WC WD WD45 12V

4 Cylinder Delco Distributor Ignition Kit: USA Made Distributor Cap, Dust Cover, Points, Condenser, Rotor, USA Made Copper Core Straight boot spark plug wire set & 12V Internally Resisted Hot Coil – Hot Coil Rated up to 55,000 Volts. Fits Allis Chalmers B, C, CA, G, H3, IB, RC, WC, WD, WD45, WF, D10, D12, D14, D15, D17, I40, I1400, I500, I60, I600, Combine E, 60, 60A, 66, 72, 90, Motor Grader D, DG, M65, Power Unit W201, W226, W25, Cotton Picker 616, Loader TL10, TL6, TL11, TL12. D, DC, DC3, DC4, DCS, DEX, DH, DI, DI(NAR), DO, DOVS, DO(STD), DOEX, DV, S, SC, SC3, SC4, SI, SO, 200, 200B, 210B, 211B, 300, 300B, 310B, 311B, 312B, 400B, 410B, 411B, 420B, 500B, 510B, 511B, 600B, 610B, 611B, 614B. Fits Cockshutt 540, 550, 60, 66, 660, 90, 99, 1350. BF, BG, BIG, Big Mo 400, Big Mo 500, Big Mo 600, G, GB, GBLP, GTA, GTB, GTC, JetStar, JetStar 2, M5, M504, M602, M604, R, RT, RTE, RTI, RTN, RTS, RTU, U, UB, UBE, UBN, UB Special, UBU, UT, UTC, UTE, UTI, UTN, UTS, UTU, Z, ZA, ZAE, ZAN, ZAS, ZAU, ZB, ZBE, ZBN, ZBU, ZT, ZTI, ZTN, ZTS, ZTU, 335, 445, 4 Star, 4 Star Super, 5 Star, JetStar 3, V, Harvester G4. Fits Oliver Super 44, Super 55, Super 66, 440, 550, 60, 66, 660, 90. Please verify your tractor has the Delco Clip Held Distributor & 12 Volts. This Tune up kit does not fit Delco Screw Held, Autolite / Prestolite Distributors, IH Distributors or Magnetos. This Delco Distributor Tune up kit can fit these models listed and other models (IH, John Deere, Massey Ferguson) if you have the 4 Cylinder Delco (Clip-held) Distributor, 12V System and if you wish to use these Orange Cotton cloth Spark plug wires on your respective model. Parts listed are “made for”, “compatible with” and/or “fit” the respective makes and models listed if applicable. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Antique & Vintage Equipment Parts”. The seller is “southernoak11″ and is located in this country: US. This item can be shipped worldwide.
  • Model: 4 Cyl Gas Tractor with Delco Clip Held (12 Volts)
  • Compatible Equipment Make: Allis Chalmers, Case, Cockshutt, Minneapolis Moline, Oliver
  • Distributor:: Delco Clip Held Distributor (only)
  • Spark plug wires: Orange Cloth – Copper Core
  • Part Type: Delco Distributor Ignition Tune Up Kit (12V Coil)
  • Brand: SouthernOak
  • Compatible Equipment Type: Tractor
Allis Chalmers WD45 with RARE roll over snap coupler plow

Allis Chalmers WD45 with RARE roll over snap coupler plow

Allis Chalmers WD45 with RARE roll over snap coupler plow

Allis Chalmers WD45 with RARE roll over snap coupler plow

Allis Chalmers WD45 with RARE roll over snap coupler plow

Allis Chalmers WD45 with RARE roll over snap coupler plow

Allis Chalmers WD45 with RARE roll over snap coupler plow

Allis Chalmers WD45 with RARE roll over snap coupler plow

Allis Chalmers WD45 with RARE roll over snap coupler plow

Allis Chalmers WD45 with RARE roll over snap coupler plow

Allis Chalmers WD45 with RARE roll over snap coupler plow

Allis Chalmers WD45 with RARE roll over snap coupler plow

Very original 1957 Allis Chalmers WD45. Including factory power steering system, factory front slab weights and brackets, new rear tires with excellent condition original never fluid filled power spacing rims, factory snap coupler system also with original draw bar, RARE Allis Chalmers 2 bottom 16 roll over plow, PTO, Hand Crank, Toolbox, 6v complete working system. Very original tractor with recent overhaul including the. 030 oversized crater pistons. Tractor starts easy, runs great, drives well, brakes work, PTO runs smoothly, lights work, generator charges, very snappy throttle, clutch is tight, hand clutch snaps in and out like should, power steering works as should, very minimal oil leaks. If you’re looking for a reliable field ready, original, straight complete honest working tractor or one for the collection look no further! Guaranteed to turn people’s heads, get attention at local tractor shows/parades or field days! Any questions feel free to ask. The item “Allis Chalmers WD45 with RARE roll over snap coupler plow” is in sale since Monday, December 14, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Antique & Vintage Equipment Parts”. The seller is “rile.hans” and is located in Black River Falls, Wisconsin. This item can’t be shipped, the buyer must pick up the item.
  • Part Type: Rare Tractor/Plow
  • Model: WD45
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Brand: Allis-Chalmers
  • Compatible Equipment Make: AGCO
  • Model Year: 1957
  • Compatible Equipment Type: Rare
  • Bundle Description: Tractor With Plow
Remanufactured Carburetor Marvel Schebler Allis Chalmers WD45 D17

Due to core availability, at times we may need to rebuild Your core. Fits Allis Chalmers Tractor(s) D17 (early), WD45 (with cable choke). Replaces Marvel Schebler Mfg nos TSX773. All States Ag Parts Item No. This item ships for Free! The item “Remanufactured Carburetor Marvel Schebler Allis Chalmers WD45 D17″ is in sale since Saturday, October 3, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Air Intake & Fuel Delivery”. The seller is “tractorpartsasap” and is located in De Soto, Iowa. This item can be shipped to United States.
  • Marvel Schebler Mfg #: TSX773
  • Compatible Equipment Type: Allis Chalmers Tractor
  • Compatible Equipment Make: Allis Chalmers
  • Compatible Model: Allis Chalmers D17(early)
  • Part Type: Fuel System
  • Brand: Remanufactured part for Marvel Schebler
  • MPN: TSX773
Remanufactured Magneto Allis Chalmers B D12 CA D10 WD45 C WD Minneapolis Moline

Fits Allis Chalmers Tractor(s) B, C, CA, D10, D12, RC, U, UC, WC, WD, WD45. Fits Minneapolis Moline Tractor(s) R, Z. All States Ag Parts Item No. This item ships for Free! The item “Remanufactured Magneto Allis Chalmers B D12 CA D10 WD45 C WD Minneapolis Moline” is in sale since Thursday, July 30, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Charging & Starting Systems\Electrical Systems”. The seller is “tractorpartsasap” and is located in Lake Mills, Iowa. This item can be shipped to United States.
  • Compatible Equipment Type: Allis Chalmers Tractor
  • Compatible Equipment Make: Allis Chalmers
  • Compatible Model: Allis Chalmers WD45
  • Part Type: Electrical
  • Brand: Remanufactured part for Allis Chalmers
  • MPN: Does not apply
70239961 Allis Chalmers WD45 D17 ZENITH 14991 Carburetor TSX871 MADE IN USA

70239961 Allis Chalmers WD45 D17 ZENITH 14991 Carburetor TSX871 MADE IN USA

70239961 Allis Chalmers WD45 D17 ZENITH 14991 Carburetor TSX871 MADE IN USA

70239961 Allis Chalmers WD45 D17 ZENITH 14991 Carburetor TSX871 MADE IN USA

Allis Chalmers Massey Ferguson Oliver. For Massey 235 Continental Gas; 245 to S/N 9A349239; Allis WD45; 170; D17 Prior to Series IV with Tractor S/N above 42001; Oliver 1550, 880. Their application BEFORE ordering. Many tractors have more than one option for some parts. Should Replace: Marvel-Schebler #’s. TSX181, TSX374, TXS464, TSX505, TSX506, TSX506A, TSX561, TSX596, TSX610, TSX755, TSX773, TSX853, TSX869, TSX871, TSX903 Should Replace: Zenith #’s 11588, 11973, 12032, 12217, 13153, 13154, 13294, 13795 New Zenith. Please Read Below BEFORE Ordering. Our parts will fit your tractor. The part description, part number and/or model shown do not guarantee the part will fit your tractor. The dimensions, tooth/splines counts, measurements, cast or marked number, etc. Given in our description with your old part. Removing the old part from your tractor to match our information, BEFORE ORDERING , should ensure you receive the correct part. BEFORE ordering our parts. Recommend the buyers do their own research, through the OEM on-line parts catalogs for their particular application. This is where we obtain our information, but we are not perfect and can make mistakes. The pictures we post are of the actual part(s) – what you see is what you get. (unless otherwise stated in the description or on the photo). Are cleaned and inspected before being listed. We do not list or sell any used part that does not meet our standards i. If we wouldn’t use it, we aren’t going to sell it. We Only List What We Stock. Southeast Tractor Parts (setractorparts) has been in the new, used and rebuilt tractor parts business since 1995. With a combined total of over 50 years in the tractor business, our #1 priority is to provide our customers with the best service possible and lower parts costs. We have a large base of repeat customers and would welcome you to become a part of that customer base. Our physical address is 14720 Highway 151, Jefferson, SC 29718. We are located on Highway 151, ½ mile north of Highway 903. All defective parts will require a Return Authorization. Eturns require prior authorization. Some items are NOT returnable (see below). And Return Authorization information. We recommend the buyers do their own research, through the OEM on-line parts catalogs for their particular application BEFORE ordering our parts. Electrical items and books are non-refundable. Engine gasket Sets, and engine bearing sets are NOT returnable if the plastic seals have been opened = NO Exceptions. Other non-refundable items will be noted, in the listing, “AS IS = NO RETURN”. We will work with each customer on an individual basis to resolve any disputes. Please ensure all packaging, etc. All New parts, unless otherwise noted, are New Replacement Parts. The item “70239961 Allis Chalmers WD45 D17 ZENITH 14991 Carburetor TSX871 MADE IN USA” is in sale since Monday, April 15, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Air Intake & Fuel Delivery”. The seller is “setractorparts” and is located in Jefferson, South Carolina. This item can be shipped to United States.
  • Model: WD45, 170, 235, 245
  • Modified Item: No
  • Country/Region of Manufacture: Unknown
  • Custom Bundle: No
  • Compatible Equipment Make: Massey Ferguson
  • STP: D1519
  • Non-Domestic Product: No
  • Oliver: 1550, 880
  • Marvel Schebler: TSX181, TSX374, TXS464, TSX505, TSX506, TSX506A
  • Marvel Schebler +: TSX561, TSX596, TSX610, TSX755, TSX773, TSX853
  • Marvel Schebler ++: TSX869, TSX871, TSX903
  • Type: Fuel System
  • Zenith: 1588, 11973, 12032, 12217, 13153, 13154, 13294
  • Zenith +: 13795, 14991
  • Part Type: Carburetor
  • MPN: 14991
  • Brand: Zenith
  • Equipment Type: Tractor
  • Part Number: TSX181, TSX374, TXS464, TSX505, TSX506, TSX506A
  • Part Number +: TSX561, TSX596, TSX610, TSX755, TSX773, TSX853
  • Part Number ++: TSX869, TSX871, TSX903, 11588, 11973, 12032
  • Part Number +++: 12217, 13153, 13154, 13294, 13795, 14991
  • Model +: Zenith replacement for Marvel Schebler
Remanufactured Magneto Allis Chalmers WD D12 B D10 WD45 C CA Minneapolis Moline

Fits Allis Chalmers Tractor(s) B, C, CA, D10, D12, RC, U, UC, WC, WD, WD45. Fits Minneapolis Moline Tractor(s) R, Z. All States Ag Parts Item No. This item ships for Free! The item “Remanufactured Magneto Allis Chalmers WD D12 B D10 WD45 C CA Minneapolis Moline” is in sale since Thursday, February 21, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Charging & Starting Systems\Electrical Systems”. The seller is “tractorpartsasap” and is located in Lake Mills, Iowa. This item can be shipped to United States.
  • Compatible Equipment Type: Allis Chalmers Tractor
  • Compatible Equipment Make: Allis Chalmers
  • Compatible Model: Allis Chalmers WD45
  • Part Type: Electrical
  • Brand: Remanufactured part for Allis Chalmers
  • MPN: Does not apply
Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Used magneto off running working allis b tractor 1950 pictures shows condition. This ones in real nice shape used the tractor about 2 years. Ships the way you see it dirty any questions send message thanks for looking. The item “Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z” is in sale since Thursday, July 11, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Antique & Vintage Equipment Parts”. The seller is “mothetractorman-3″ and is located in North Bay, New York. This item can be shipped to United States.
  • Compatible Equipment Make: Minneapolis Moline
  • Part Type: Magneto
  • Brand: Fairbanks Morse
  • Compatible Equipment Type: Combine
Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Used magneto off running allis b tractor pictures shows condition. Ships the way you see it dirty any questions send message thanks for looking. The item “Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z” is in sale since Friday, June 21, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Antique & Vintage Equipment Parts”. The seller is “mothetractorman-3″ and is located in North Bay, New York. This item can be shipped to United States.
  • Compatible Equipment Make: Minneapolis Moline
  • Part Type: Magneto
  • Brand: Fairbanks Morse
  • Compatible Equipment Type: Combine
Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z

Used magneto off running allis b tractor pictures shows condition. Ships the way you see it dirty any questions send message thanks for looking. The item “Magneto fits Allis Chalmers CA WD D12 D10 WD45 C B Minneapolis Moline r, z” is in sale since Tuesday, June 11, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Antique & Vintage Equipment Parts”. The seller is “mothetractorman-3″ and is located in North Bay, New York. This item can be shipped to United States.
  • Compatible Equipment Make: Minneapolis Moline
  • Part Type: Magneto
  • Brand: Fairbanks Morse
  • Compatible Equipment Type: Combine